FTA FREE To Air ABA Dss Blog

Do you own a Pansat 2700 N2 and find that your signal level is high but that your picture quality on your television is bad then you need to make some adjustments to your dish. If your signal is low you may have to turn your dish a little up or down dish and there you can tell you if the signal moves. Click here for more information.

Recently, a consumer purchased a new computer only to realize that it does not have a 9 pin port. They then purchased a USB seriel adapter only to find that their downloads were very slow and its taking an extremely long time to update their pansat. There are actually a few good solutions to this problem one of which is going into my computer and right clicking then proceed into hardware and follow the directions listed here.

If you’re looking to find out how to load a VS Ultra file by USB then you will be glad to find out that it is a pretty simple proceedure. You need to begin by unzipping the current bin file. Secondly, you need to place the bin on the flash drive and insert into STB. Find out your next step by clicking here.

The Pansat 2700 sometimes has a problem where it will lose signal every so often. A common thought in fixing this is to shut it off and turn it back on. To eliminate this problem all you have to do is do database reset and follow the simple steps listed here.

Are you running a b3v satellite dish and have accidently hit the set default key button and now are having problems getting a picture? This is a simple problem to fix and can be taken care of by entering the latest keys manually. FInd out how to solve this problem here.

Have you just recently purchased a Viewsat 2000 platinum receiver with Diseqc 1.2 motorized H-H Motor with 1.2 meter dish and dual LNB and have questions about which way to position your dish either by degrees or just by a number read out? Find out which satellite you are receiving by antenna positioning by clicking here.